Learn How to fix GoTV Decoder Showing Red,Yellow/Orange or Green Light

Please Click to rate this !
[Total: 1 Average: 5]

Learn How to Showing Red,Yellow/Orange or Green Light

How to fix GoTV Decoder Showing Red,Yellow/Orange or Green Light

Carefully follow below steps to fix gotv indicating different colors.

  • Step 1: Press the power button
  • Step 2: long press the power button, connect the power cable to the decoder with the AV cables or cord and the antennae cable (RF IN)
  • Step 3: now 3 lights flashes and then you can remove your hand from the power button
  • Step 4: tap p+ p- twice
  • Step 6: after that, it will take you straight to the scan process, wait till the decoder completes the scanning and with complete channel .


if the color blinking persists it means is not receiving sufficient power or voltage is low. Change the power source and if that did not solve the problem, visit the near Gotv for repair.

Solution to your Gotv Decoder Blinking Orange Light

  • Step 1:
  • Step 2:
  • Step 3:
  • Step 4:

My Gotv Decoder Shows Orange Light, Stops scanning at 50% on

Firstly check if you have at least 60% signal strength and 100% quality for maximum reception. However you may adjust the position of your antenna and ensure that it is high enough and nothing is obstructing it from sky view.

My Gotv decoder is not turning ON, Shows RED Light

Tap on the RED button on your decoder remote. If your device do not turn on after pressing the power button, check if it is connected to power supply. After that check if the power cable is in good condition. If after confirming that your electrical outlet is in proper condition and your GOTV decoder do not turn on yet- take it to the nearest GOtv office for repair.

Gotv Channels not active

You will have to scan. Press Menu > Advanced Options > Installation > Automatics Scan > OK

Gotv Decoder Showing “no service found”

For a quality reception, it is recommended you get a Gotv Antenna.


To see your GOTV signal strength progress. Press Menu > Information Central > Signal Strength/Quality. If the signal strength is below 90% and quality below 100%, you will have to check the connections behind your decoder.

Red light on Gotv Decoder

If your GOtv decoder is showing red light, it means your account is disconnected. Pay for your package subscription and get reconnected.

Source From myfreshgists.com


Do you find Gistportal useful? Click here to give us five stars rating!

You May Like

Join the Discussion

Be the first to comment

Leave a Reply

Your email address will not be published.